THE LEADING EXPERTS IN DESIGN AND MANUFACTURE CUSTOM GARMENTS
2023-12-06 09:07:07
Quality standards for camouflage work uniforms
Quality standard for camouflage workwear - Fabric
The surface, lining, and accessories of the provided clothing should not fade after washing, and the texture (composition, feel, luster, fabric structure, etc.), camouflage, and embroidery (position, area) should match the requirements.
The fabric of clothing should not have any skewed weft. The surface, lining, and accessories of clothing should not have any scratches, damages, punctures, or serious textile residues (such as coarse yarn, missing yarn, knots, etc.) that affect the wearing effect, as well as needle holes on the edges of the fabric. Clothing should not have uneven surface textures, and there should be no yarn joints on the surface of the clothing.
The surface, lining, and accessories of the provided clothing must not have oil stains, pen stains, rust stains, color stains, watermarks, or offset printing
Various stains such as powder printing. There should be no obvious color difference between the same clothing; A set with separate upper and lower clothing, with no significant color difference between the upper and matching lower clothing. After washing, there should be no blistering or damage to the collar.
National standard for camouflage work uniforms - workmanship
The placket is straight, flat, and of consistent length. The front drawstring is flat and uniform in width, and the inner placket cannot be longer than the front placket. Zippered lips should be flat, uniform, without wrinkles, and not open. The zipper does not swell. The buttons are straight and evenly spaced. The line is uniform and straight, with no backflow at the end and consistent width on both sides. The fork is straight and without any disturbance.
The pocket should be square and flat, and the opening should not be open. The bag cover and patch are square and flat, with consistent front and back, height, and size. The height of the inner bag. Same size, square and flat. The size of the collar and mouth should be consistent, the lapel should be flat and neat at both ends, the collar should be round and smooth, the collar surface should be flat and flat, the elasticity should be appropriate, the outer mouth should be straight without lifting, and the bottom collar should not be exposed.
The shoulders are flat, the shoulder seams are straight, the width of both shoulders is consistent, and the seams are symmetrical. The sleeve length, cuffs size, and width are consistent, and the sleeve loop height, length, and width are consistent. The back is flat, the seams are straight, and the back waistband is horizontally symmetrical, with appropriate elasticity. The bottom edge is round and smooth, flat, with rubber roots and consistent rib width. The rib should be sewn with stripes.
中文
